The Philips HS1 AED Kit is suitable for placement in indoor spaces, such as homes, offices, gyms and care centres. For a low monthly fee you will receive the most reliable Philips defibrillator with maintenance, free replacement after deployment or in the event of a malfunction, and ongoing all-risk insurance as well as warranty. Delivery time: 2 working days.
| Total per month Philips HS1 AED Service & maintenance |
£29.95 |
|---|---|
| Free extra’s Wall bracket Stickers |
£0.00 |
Questions? Call 017 329 133 10 or email [email protected]
You will receive an always working Philips defibrillator. For an all-in low monthly fee. Including service and maintenance. As well as All risk AED insurance. The kit comes with the following:
Note: The Philips HS1 is only for indoor locations. Not for an outdoor cabinet or vehicle.
If you need a defibrillator for one of the above situations, there’s Philips FRx Kit.
In our subscription, we use the best and most sold AED in the world: the Philips Heartstart HS1 AED. Due to its unmatched ease of use and high reliability, it is the most successful AED of all time.
Even without experience or training, you can quickly and effectively assist in a cardiac arrest situation with the Philips Heartstart HS1 AED. The AED guides you step by step through the instructions. This way, anyone can save a life.
Rapid shock delivery after analysis significantly increases the patient’s chance of survival. Of all AEDs, the Philips HeartStart HS1 AED has the fastest time to shock delivery. Crucial for saving lives.
The Philips Heartstart HS1 AED performs continuous self-tests. These are the most comprehensive and thorough self-tests of all AEDs. Philips is the only manufacturer that guarantees the perfect functioning of its AEDs if the green light blinks every 4 seconds and the device does not beep. Relying on this is literally a matter of life and death.
| Technical Specifications of Philips HeartStart HS1 | |
| Battery | |
| Type | 9 volt DC, 4.2 Ah, composed of disposable long-life lithium manganese dioxide primary cells |
| Capacity | Minimum 200 shocks or 4 hours of operating time (EN60601-2-4:2003) |
| Install-by Date | Battery is labelled with an install-by date of at least five years from date of manufacture |
| Standby Life | Four years typical when the battery is installed by the install-by date. (Will power the AED in standby state within the specified Standby Temperature range, assuming one battery insertion test and no defibrillation uses) |
| Product Specifications | |
| Kit Contents | Defibrillator, battery (one, pre-installed), SMART Pads (one set, pre-installed), set-up/maintenance guide with expiration date tags, owner’s manual, quick reference guide |
| Waveform | SMART Truncated exponential biphasic. Waveform parameters adjusted as a function of patient impedance |
| Defibrillation peak current – Adult | 32 A (150 J nominal) into a 50 ohm load |
| Defibrillation peak current – Pediatric | 19 A (50 J nominal) into a 50 ohm load (using optional infant/child SMART Pads Cartridge) |
| Quick Shock | Able to deliver a shock after the end of a CPR interval, typically in eight seconds |
| Shock-to-Shock Cycle Time | Typically less than 20 seconds between shocks in a series |
| Voice Instructions | Detailed voice messages guide responder through use of the defibrillator |
| CPR Guidance | Instructions for adult and infant/child CPR available at user selection |
| Shock Delivery | Via adhesive pads placed on patient’s bare skin as illustrated on pads |
| Controls | Green SMART Pads cartridge handle, green On/Off button, blue i-button, orange Shock button |
| Indicators | Ready light, blue i-button, caution light |
| SMART Pads | |
| Energy delivered | Adult: nominal 150 joules into a 50 ohm load; Infant/Child: nominal 50 joules into a 50 ohm load |
| How Supplied | Disposable cartridge, containing adhesive defibrillation pads, clicks into defibrillator for an integrated pads solution |
| Active Surface Area | 85 cm² (13.2 in²) each |
| Cable Length | Adult pads: 137 cm (54″); Infant/Child pads: 102 cm (40″) |
| Use-by Date | Cartridge is labelled with a use-by date of at least two years from date of manufacture |
| Training pads (optional) | Special pads put HeartStart into training mode and disable its energy delivery capability. Training pads feature 8 real-world training scripts. Use with training mat (included) or with adapters on manikins |
| Automated and User-activated Self-tests | |
| Daily Automatic Self-tests | Tests internal circuitry, waveform delivery system, pads cartridge, and battery capacity |
| Pads Integrity Test | Specifically tests readiness-for-use of pads (gel moisture) |
| Battery Insertion Test | Upon battery insertion, extensive automatic self-tests and user-interactive tests check device readiness |
| Status Indicator | Blinking green “Ready” light indicates ready for use. Audible “chirp” indicates need for maintenance |
| Data Recording and Transmission | |
| Infrared | Wireless transmission of event data to a PC or Palm PDA, using the IrDA protocol |
| Data Stored | First 15 minutes of ECG and the entire incident’s events and analysis decisions |
| Environmental/Physical Requirements | |
| Sealing | Solid objects per EN60529 class IP2X; Drip-proof per EN60529 class IPX1 |
| Operating Temperature | 0 – 50 °C (32 – 122 °F) |
| Standby Temperature | 0 – 43 °C (32 – 109 °F) |
| Operating Altitude | 0 to 4,500 m (0 to 15,000 ft) |
| Operating Humidity | 0 to 95 % relative humidity (non-condensing) |
| Shock/Drop Abuse Tolerance | Withstands 1 meter drop to any edge, corner, or surface |
| Vibration | Meets EN1789 random and swept sine, road ambulance specification in operating and standby states |
| Standby Humidity | 0 to 75 % relative humidity (non-condensing) |
| Standby Altitude | > 48 hours from 0 to 8,500 ft and <48 hours from 8,500 to 15,000 ft |
| EMI (Radiated/Immunity) | Meets EN55011 Group 1 Level B Class B and EN61000-4-3 |
More information about Philips.
Yes, full service and maintenance for your AED is included in the monthly fee.
Yes, we offer a free wall bracket for the AED. You can request this at checkout.
For outdoor cabinets and other types of cabinets, please contact us and request a custom quote.
No, all costs are included in the monthly amount.
The Philips HS1 and Philips FRx are both suited for indoor use, but for an AED suitable for being outdoors, we can supply the Philips FRx instead.
For places frequented by children, the Philips FRx, is more suitable.
The main differences between Pulse4all and leasing an AED are the contract duration and costs, both of which are more advantageous with Pulse4all. For more information, view the full differences between leasing and defibswap.
The main differences between Pulse4all and renting an AED are the contract duration and costs, both of which are more advantageous with Pulse4all. For more information, view the full differences between renting and defibswap.
Cost savings over time, included service and maintenance, and hotswap service. View the full differences between buying and defibswap.
We offer the Philips Heartstart HS1 AED, as well as the Philips FRx.
Yes, we do. In fact, we deliver to all EU countries.
We offer the following payment options: Credit card, Direct debit, Paypal and bank transfer.
You can order as an association. So as a neighborhood association, homeowners association, sports club, or if you have a practice. Request a custom quote or contact us for specific requests.
Within 2 working days.
Yes, discounts are available for large orders on very special occasions. Contact us to see all available options.
Please feel free to contact us weekdays between 08:00 and 17:00
Call us: 017 329 133 10
Email us: [email protected]
At Pulse4all we choose to use only defibs from Philips due to their unmatched ease of use and reliability.
Choosing Pulse4all means contributing to a network of well-functioning defibrillators in Europe. Pulse4all is the only defibrillator provider that works 100% circularly. And we donate 20% of the proceeds from charitable organisations back to our chosen charities.
